Does the machine need to be repaired by professional personnel for air leakage

The equipment yellow press saves a lot of human resources. If the working pressure of the spring is adjusted, the equipment will automatically produce springs, which is a reflection of contemporary production and manufacturing. Many spring coiling machines have encountered leakage conditions from spring coiling machines or spring coiling machines. What should I do in such a situation?

Use a multimeter to measure the working voltage of the spring pressing machine winding machine to ground. Generally, less than 60 volts is normal. If it exceeds 60 volts, a wire connector must be installed. If there is a wire connector for the switch power supply, please connect the switch power supply wire connector of the spring yellow coil machine. Use a regular cable to connect the equipment to the household iron water pipe, use an iron rod to reach a depth of about one meter underground, and then use a cable to connect the equipment.

If the accurate measurement value of the working voltage exceeds 60 volts and is below 150 volts, and sometimes there is a switching power supply tripping, it will indicate the existence of a series switching power supply condition, especially when the Type 8 spring yellow coiler occurs. It is proposed to connect the equipment to a general civilian type switching power supply instead of connecting to a 380V industrial power supply (one live and one neutral). If the working voltage is accurately measured between 200 volts and 220 volts, it indicates that the wiring cover at a certain point on the device is damaged. Firstly, check if the wiring of each cooling fan is damaged, and then check if the route from the corner of the equipment to the control board is damaged. If not, please ask the electric welder to conduct the inspection using a cleaning method. The above is how to solve the leakage of the yellow wire winding machine. If there is a leakage problem, please follow the actual operation above to prevent risks.