How to solve the problem of core rod blockage in the spring machine

Due to wire quality issues or operational errors, it is easy to cause wire blockage in the core rod of the spring machine. If the core rod is blocked and the blocked spring steel wire is not removed in a timely manner, it will affect the normal operation of the spring machine. How to solve the problem of wire blockage in the core rod of the spring machine?

The spring core rod is composed of two parts: the main body and the tail clamp. The main body of the core rod is a semi circular fan-shaped structure, and the conventional angles are usually 165 ° and 120 °; The tail clamp can be divided into two structures: a whole and a half body, and can be freely pulled out from one end of the core rod. The main function it plays in the equipment is to assist in cutting and partially straightening the wire during the operation of the spring machine. It is an essential auxiliary tool in the forming process of the spring machine. Below, we will briefly introduce the solution:

① Firstly, turn off the spring machine switch, cut the steel wire from the rear wire feeding roller, and then remove the core rod from the front body panel, attempting to remove the tail clamp of the core rod.

② If the tail clamp can be removed, it indicates that the main body of the core rod is blocked. At this time, you can use pliers to clamp the steel wire and try to horizontally extract the wire from one end. You can also try to drip some liquid lubricating oil into the core rod.

③ If the tail clamp cannot be removed, it indicates that the tail clamp of the core rod may be blocked. You can try to clamp the tail clamp with pliers and then pull out the tail clamp horizontally and backwards. If it is a bipartite tail clip, simply remove the tail clip. If it is a complete tail clamp, it is necessary to find a way to remove the blocked steel wire or replace it with a new tail clamp, which can solve the problem of core rod wire blockage.