How to Control the Shape of Springs in a Camless Spring Machine

1. Pre stretching load: The pre stretching load determines the material and wire diameter of the spring, and the pre stretching length can be adjusted according to the size of the sealing element.

2. Spindle outer diameter: The inner diameter of the torsion spring group with a given size and resolution can generally be based on the spindle mentioned above, but the teaching philosophy needs to be changed. When the spring body changes, we leave appropriate blank space.

3. The starting and ending points of the action: When the torsion bar is not working, it should be at a different position from the pointing angle, which can control the length, mode, and angle of the support bar.

4. Active stroke load: The design of the tension spring needs to clarify the position of action and the required elasticity. The material, diameter, and number of turns can be determined by setting the position and understanding the required elasticity.

5. Installation workspace: When designing compression springs, enterprises can have a clear understanding of the social necessity and installation space required for compression springs, thereby effectively managing and controlling the manufacturing technical conditions such as outer diameter, inner diameter, and free length of compression springs.

6. Changing the fulcrum: There must be a point when the torsion spring is working. This theoretical fulcrum can determine the length and vibration mode of the torsion bar.

7. Install the inner diameter of a space: If there are changes in the spring installation mold, it is necessary to fully consider the casting development space. The spatial structure determines the outer diameter, free time length, and number of coils of the spring body.

8. Environmental factors: Due to different environments, movable springs can be affected by environmental factors, thereby affecting their service life. Design changes, environmental temperature, and humidity must be considered. Temperature is crucial for the service life of the effect spring, and humidity is not easy to handle the oxidation of the outer spring. Therefore, environmental factors can determine whether the spring needs to be treated and the appearance of the selected material.